CSB1726-ArmadaXP, MV78460 Network System On a Module (SOM)

The CSB1726-ArmadaXP, designed, developed and manufactured by Cogent Computer Systems, Inc., is a high
performance, network oriented, ARMv7 based System on a Module (SOM). The CSB1726 provides a very small,
powerful and flexible engine for embedded Linux based 10/100/1000 networking and storage applications. The
features of the CSB1726 are listed below.

Feature Description
Core Quad 1.6Ghz ARMv7 Core, 32KB I/D and Shared 2MB L2 Cache
Floating Point Unit IEEE 754 Compliant Single/Double Precision
SDRAM 2GByte 64-Bit Wide DDR3-1600 with 8-Bit Error Checking and Correction (ECC)
NOR FLASH 8MByte SPI NOR
NAND FLASH 512MByte 8-Bit Wide SLC NAND Flash
PCI Express Ports One x4 and Two x1 GEN II 5Gbps
GIGe Copper Ports Two 1G Copper with Autoswitch SGMII/Fiber
SGMII/XAUI Ports Two 1G/2.5G Capable SGMII
Video Input Port n/a
SATA Ports Two Gen I and Gen II
SDIO Port One 4-Bit SD/MMC, SDIO compliant
SSI Port n/a
I2S/AC97 n/a
UART Ports Two 4-wire and One 2-Wire UART, up to 5.2M Baud
CAN Ports n/a
SPI Port One, 50Mhz Maximum Clock Rate
USB Ports Two USB2.0 480Mbit Host Ports via On-Board Hub
I2C Ports Two 100Khz/400Khz, Master and Slave Support
Real Time Clock Internal RTC with External Battery Input
XOR Engine

Dual Channel with iSCSI CRC32C Mode

Security Offload

DES, 3DES, AES128, AES256, SHA-1 and MD5

Boot Options NAND and SPI
Power Management 8-Bit AVR Micro supports Power Sequence, Configuration and Thermal Management
Form Factor Cogent MXM Type B, 75mm x 70mm
JTAG Standard ARM JTAG Interface (Header is off board)
Power 8V to 18V input, On-Board 3.3V/6Amp Regulator (up to 4A is available off board)
Target Board CSB1701 Flex-ATX Development Board
Boot Monitor Uboot
Datasheet CSB1726 datasheet
Board Photos

Top, Bottom

Users Manual CSB1726 HW Reference Manual
Linux BSP 3.2.x
Price Contact Cogent
Availability Status In Production

 

 

 
   

About Us | Contact Us
©2013 Cogent Computer Systems, Inc. - This site is best viewed at 1024x768 or higher

Last updated on August 16, 2013
     
March 27, 2013